Nir Biton
6 years ago
“Method Doors&Gates Installed a new garage door in my house . Great price and service , door looks great. the job was done perfectly very professional.”
Wayne Dalton Garage Door Repair
Wayne Dalton Garage Door Repair in Los Angeles
TorqueMaster and conventional spring systems, cables, and sections on Wayne Dalton doors, diagnosed by an independent company that checks which system you have first.
Diagnosis before a repair decision
Request a Repair Assessment
Tell us the location and symptoms. We'll call to discuss the visit.
No obligation. It takes about a minute, then we call to schedule. Prefer to talk? (818) 782-6180
Wayne Dalton Garage Door Repair
TorqueMaster or conventional springs: why it matters
Wayne Dalton, a division of Overhead Door Corporation, sells some of its doors with TorqueMaster® Plus, a counterbalance system that encloses the springs inside a steel tube across the top of the door. Its product pages list it on steel models such as Classic Steel 8000, 8200, 9100, and 9605, and it also publishes manuals for Models 8000 and 8200 with conventional torsion or extension springs. TorqueMaster Plus also includes an anti-drop device meant to stop the door from falling if a spring breaks while the door is up. The two kinds of system are wound, reset, and repaired differently.
Method is an independent service company, not affiliated with or authorized by Wayne Dalton or Overhead Door Corporation. On a TorqueMaster door we read the warning tag on the end bracket, which is meant to record the number of installed spring turns, and confirm whether the unit is TorqueMaster Plus or an earlier TorqueMaster. TorqueMaster Plus springs come pre-assembled inside the spring tube, so the replacement is chosen for the system and the door. On doors with conventional springs, we size the new springs to the door's weight and replace both on a two-spring door.
Our phone is answered 24/7. Call as soon as the door stops behaving normally and tell us what it does: whether it opens, closes, clicks, or feels heavy. In the meantime, keep everyone and every car out of the doorway. The diagnosis happens at the door, the price is written down before work begins, and if the door is past the point where a repair makes sense, we say so and give you a replacement quote.
- Serving Los Angeles Since 2006
- Licensed, Bonded & Insured
- 24/7 Emergency Garage Door Service
- Written Price Before Any Repair
- Every Brand Serviced
Designs & details
Explore Wayne Dalton Garage Door Repair
Labeled design renderings and technical illustrations. Select an image for a closer look.
Repair assessment
Wayne Dalton door problems and their causes
Won't close, or clicks on the way up
Those are the signs Wayne Dalton gives for an engaged TorqueMaster Plus: a single-spring door won't close, and a two-spring door makes a distinct clicking noise as it opens. It engages after a spring failure or a door forced by hand, and the manual warns that running an opener against it can damage the door and the opener.
Door suddenly heavy or opener straining
With the springs sealed inside the tube, a break shows up in how the door behaves rather than as a visible gap in a coil. The door feels far heavier than usual, or the opener labors to lift it.
Earlier TorqueMaster units
Wayne Dalton's current manuals cover TorqueMaster Plus, which is wound through a ratchet wheel in the end bracket. An older door may carry an earlier TorqueMaster, so we identify the version on site before quoting springs or parts.
Conventional torsion or extension springs
Wayne Dalton doors without TorqueMaster use open torsion springs on a shaft, wound with winding bars, or extension springs along the horizontal tracks. Each extension spring should have a safety cable running through it.
Dented or damaged sections
Wayne Dalton sells Classic Steel, Carriage House Steel, fiberglass, aluminum, vinyl, and wood doors, and some steel models use a pinch-resistant section design. The new section has to be the same model, not just the same color.
Wayne Dalton and Genie openers
Wayne Dalton's opener page now presents Genie openers, which it calls Wayne Dalton openers powered by Genie, sold through its dealers. An older Wayne Dalton-labeled opener can still be assessed and repaired where parts exist, and we quote a replacement where they don't.
Honest pricing
How we price Wayne Dalton garage door repair
Two Wayne Dalton doors of the same model can need very different repairs, because one may have TorqueMaster Plus, another an earlier TorqueMaster, and a third conventional springs. A number given before anyone sees the door can be for the wrong system. We confirm the counterbalance first, then write the price down.
You approve a written price after we've identified the system on site. Springs made for TorqueMaster may need to be ordered, and that sets the schedule.
Get Your Written EstimateWhat sets the number
- TorqueMaster Plus, earlier TorqueMaster, or conventional springs
- Number of springs and the door's size and weight
- Parts for an older TorqueMaster unit
- Cables, drums, or end brackets replaced
- Section damage and model-matched parts
- Opener work added to the same visit
The proposal separates the work being recommended so you can review the scope before approving it.
What to expect
How a Wayne Dalton repair is handled
Describe the symptoms
Tell us whether the door opens but won't close, clicks, feels heavy, or hangs unevenly, and have a photo of the top of the door, taken from the floor, handy.
Identify the system
We confirm TorqueMaster Plus, an earlier TorqueMaster, or conventional springs, and check the cables, drums, and brackets that work with them.
Agree on the price
You approve the price for springs, parts, and labor before work starts, including any parts an older TorqueMaster unit turns out to need.
Rebalance and test
We set the spring tension, confirm the door travels smoothly and stays balanced, and test the opener's reversal and sensors.
Reviews
What Customers Say About Working With Us
TRACY S
6 years ago
“Method Doors and Gates and Noam exceeded our expectations. Our gate and fence panels were installed last week. Installation was completed in four days with Noam directing and overseeing every aspect of the project. We are extremely pleased…”
iris V
6 years ago
“We had gates installed by Method. They did such a great job. They gave us the best customer service and really tried to please us all the way. The job was well done at a reasonable price. I highly recommend this company.”
Wayne Dalton Garage Door Repair FAQ
Questions about Wayne Dalton garage door repair
Practical answers to help you plan the next step.
No. Method is not a Wayne Dalton dealer and has no ties to Wayne Dalton or its parent, Overhead Door Corporation. We repair Wayne Dalton doors that are already installed, and when one is past repair we quote a replacement door.
We advise against it, and Wayne Dalton's own documents send mixed signals. It publishes winding steps for TorqueMaster Plus doors sold at retail, yet the same manual's warnings say to have a trained door systems technician reset the system if you are in any doubt, and to leave cables, spring assemblies, and other hardware to one. See spring repair for what a spring visit involves.
Look at the top of the door from the floor. TorqueMaster puts the springs inside a steel tube, so you see the tube and its end brackets but no coils, while a conventional torsion system shows open coil springs on a shaft and extension springs run along the horizontal tracks. A photo is enough; don't touch the brackets.
We can assess it. Wayne Dalton now pairs its doors with Genie openers, which its site calls Wayne Dalton openers powered by Genie, and both brands belong to Overhead Door Corporation. We aren't a dealer for either, but we repair Genie openers and every other brand; see Genie opener repair and garage door opener repair.
It depends on how often the door runs, because springs are rated in cycles rather than years, and one cycle is a full open and close. Standard residential torsion springs are commonly rated around 10,000 cycles, and Wayne Dalton says TorqueMaster Plus is designed to exceed industry minimum spring cycle standards by an average of 15%. It also lists an optional 25,000-cycle spring on some models, which it says gives more than twice the life of a standard torsion spring.
Service area
Wayne Dalton Garage Door Repair across Los Angeles
From our office in Van Nuys we cover the San Fernando Valley, the Westside, and the neighborhoods in between.
- Bel Air, CA
- Beverly Hills, CA
- Brentwood, CA
- Burbank, CA
- Calabasas, CA
- Canoga Park, CA
- Chatsworth, CA
- Encino, CA
- Granada Hills, CA
- Hollywood, CA
- Lake Balboa, CA
- Los Angeles, CA
- Mission Hills, CA
- North Hills, CA
- North Hollywood, CA
- Northridge, CA
- Pacific Palisades, CA
- Pacoima, CA
- Panorama City, CA
- Porter Ranch, CA
- Reseda, CA
- San Fernando, CA
- Sherman Oaks, CA
- Studio City, CA
- Sun Valley, CA
- Sylmar, CA
- Tarzana, CA
- Universal City, CA
- Valley Village, CA
- Van Nuys, CA
- West Hills, CA
- West Hollywood, CA
- Woodland Hills, CA
Related services
Garage Door Spring RepairTorsion and extension springs sized to the weight of your door and replaced as a set, with the cables, drums, and bearings checked on the same visit.- Garage Door RepairBroken springs, snapped cables, doors off track, and openers that hum but won't lift, diagnosed on site with a written price before any work starts.
- Garage Door Opener RepairOpeners that click, hum, reverse, or ignore the remote. Sensors, logic boards, gears, and travel limits are diagnosed before anything is replaced.
Brands we repair
- Clopay Garage Door Repair
- Amarr Garage Door Repair
- LiftMaster & Chamberlain Opener Repair
- Genie Garage Door Opener Repair
We service these brands independently and are not an authorized dealer for any of them.
Written price before any repair · Answered 24/7
Let’s Discuss Your Repair
Call with the address and what the door is doing. We answer 24/7 and will discuss service availability and next steps for your property.
No obligation
Request a Repair Assessment
Tell us the location and symptoms. We'll call to discuss the visit.
No obligation. It takes about a minute, then we call to schedule. Prefer to talk? (818) 782-6180